|
HONMA BERES MG7100 IRON
| Strategic weight distribution system |
| |
| Improved flying distance |
|
|
|
Improved maneuverability |
 |
|
|
|
 |
| #4 |
#5 |
#6 |
#7 |
#8 |
|
|
|
#9 |
#10 |
#11 |
AW |
SW |
Adding tungsten nickel weights to the toe and heel boosts moment of inertia (Honma’s largest /#7). This design adds power to the sides to enhance flying distance. It also controls shaking and cuts down on loss of distance caused by shots hit off-center.
In addition, each number features different weight distribution
In a carry-boosting design change, 7g to the toe and 5g to the heel were added to numbers #4 - #8: more power in the toe translates to greater carry distance. The #9 - SW numbers feature weight evenly distributed to the right and left (5g), improving maneuverability thanks to shorter gravity point distance. |
A forged steel face for the MG700
|
 |
| *1 Convex surface |
Featuring high-strength ES230 at the face, this club’s convex forged steel parts produce a mild touch when the head makes contact with the ball.
|
Unique weight distribution designs for Honma’s AW and SW wedges
|
 |
| *1 Thick construction at targeted areas |
| Sometimes the golfer needs to hit the ball out of the bunker or rough with the face open, and this strategic weight distribution design ensures a solid shot even when hit on the top of the face. The other numbers reduce blade thickness to a minimum. A low center of gravity engenders high trajectory. |
For all head speeds
Honma offers three shafts for three different head speeds (the H/S 42-45 for faster head speeds, the H/S 38-42 for average head speeds, and the H/S 34-38 for slower head speeds). There’s one that’s perfect for you!
* Honma also offers ARMRQ UD shafts made to order.
BERES MG700 SPEC
| Head material |
SUS630(body)+High-strength custom steel(face) |
| Manufacturing process |
Casting(body)+Steel rolling(face) |
| Head plating |
Double-layer plating / Satin finish + Painted finish |
| Shaft |
NEW ARMRQ UD49,ARMRQ UD54,ARMRQ UD45 |
| Flex |
R,S |
| # (No.) |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
AW |
SW |
| Loft (deg.) |
19.5 |
22.5 |
25.5 |
28.5 |
32.5 |
36.5 |
41.5 |
46.5 |
51.5 |
56.0 |
| Length(inches) |
38.5 |
38.0 |
37.5 |
37.0 |
36.5 |
36.0 |
35.5 |
35.0 |
35.0 |
35.0 |
| Lie angle (deg.) |
60.5 |
61.0 |
61.5 |
62.0 |
62.5 |
63.0 |
63.0 |
63.0 |
63.0 |
64.0 |
| Face progression (mm) |
2.75 |
3.25 |
3.25 |
3.75 |
3.75 |
4.25 |
4.25 |
4.75 |
4.75 |
4.75 |
| Face progression (mm) |
38.0 |
38.0 |
37.5 |
37.0 |
38.0 |
38.0 |
37.5 |
37.0 |
37.0 |
37.5 |
| Height to Center of Gravity(mm) |
18.0 |
18.0 |
18.5 |
19.5 |
20.0 |
20.5 |
21.0 |
21.5 |
22.5 |
22.5 |
| Depth to Center of Gravity(mm) |
5.5 |
5.0 |
5.0 |
4.7 |
4.5 |
4.0 |
3.5 |
3.2 |
2.7 |
2.5 |
| Gravity Angle (deg.) |
|
14.5 |
|
|
|
|
|
|
|
|
| NEW ARMRQ UD49 |
Swing weight |
R |
C8 |
C8 |
C8 |
C8 |
C8 |
C8 |
C8 |
C8 |
C8 |
C9 |
| S |
C9 |
C9 |
C9 |
C9 |
C9 |
C9 |
C9 |
C9 |
C9 |
D0 |
| Gross weight(g) |
R |
354 |
360 |
366 |
373 |
379 |
386 |
393 |
399 |
398 |
400 |
| S |
356 |
363 |
369 |
376 |
382 |
389 |
396 |
402 |
401 |
403 |
| ARMRQ UD54 |
Swing weight |
R |
D0 |
D0 |
D0 |
D0 |
D0 |
D0 |
D0 |
D0 |
D0 |
D1 |
| S |
D1 |
D1 |
D1 |
D1 |
D1 |
D1 |
D1 |
D1 |
D1 |
D2 |
| Gross weight(g) |
R |
362 |
368 |
374 |
380 |
386 |
393 |
400 |
407 |
406 |
407 |
| S |
364 |
370 |
376 |
383 |
389 |
396 |
403 |
410 |
409 |
411 |
| ARMRQ UD45 |
Swing weight |
R |
C8 |
C8 |
C8 |
C8 |
C8 |
C8 |
C8 |
C8 |
C8 |
C9 |
| Gross weight(g) |
S |
351 |
357 |
362 |
368 |
374 |
379 |
386 |
393 |
391 |
393 |
Data refers to the 2S grade
|
