|
| All numbers convey the same powerful image |
 |
| Each of these clubs is constructed with ball-slamming face progression—the look and feel you want on impact! They all deliver a comfortable address as well. |
| Flow design by number |
 |
| The 3W hugs the ball to enable golfers to lift the ball and send it flying. Meanwhile, the 9W eliminates excessive hugging of the ball, using the appropriate degree of spin stop the ball where it should stop. |
| For all head speeds |
 |
|
Honma offers three shafts for three different head speeds (the H/S 42-45 for faster head speeds, the H/S 38-42 for average head speeds, and the H/S 34-38 for slower head speeds). There’s one that’s perfect for you!
* Honma also offers ARMRQ UD shafts made to order. |
BERES FAIRWAY MG710 SPEC
| Head material/Manufacturing process | SUS630/Casting |
| Face material/Manufacturing process | High-strength custom steel/Steel rolling |
| Shaft | NEW ARMRQ UD49,ARMRQ UD54,ARMRQ UD45 |
| Flex | R,S |
| # (No.) | 3W | 5W | 7W | 9W |
| Loft (deg.) | 15 | 18 | 21 | 24 |
| Length(inches) | 43.0 | 42.5 | 42.0 | 41.5 |
| Head volume(cm3) | 164 | 157 | 151 | 143 |
| Lie angle (deg.) | 60.0 | 60.5 | 60.5 | 61.0 |
| Distance to Center of Gravity(mm) | 31.0 | 31.5 | 32.0 | 32.5 |
| Height to Center of Gravity(mm) | 22.5 | 23.0 | 23.0 | 23.5 |
| Depth to Center of Gravity(mm) | 32.0 | 32.5 | 32.5 | 32.5 |
| Gravity Angle (deg.) | 24.5 | 24.5 | 24.5 | 24.5 |
| NEW ARMRQ UD49 | Swing weight | R | D0 | D0 | D0 | D0 |
| S | D1 | D1 | D1 | D1 |
| Gross weight (g) | R | 304 | 307 | 310 | 313 |
| S | 307 | 310 | 313 | 316 |
| ARMRQ UD54 | Swing weight | R | D0 | D0 | D0 | D0 |
| S | D1 | D1 | D1 | D1 |
| Gross weight (g) | R | 305 | 308 | 312 | 316 |
| S | 308 | 311 | 315 | 319 |
| ARMRQ UD45 | Swing weight | R | C9 | C9 | C9 | C9 |
| Gross weight (g) | R | 297 | 300 | 304 | 308 |
|
